FAQs

Drive

Why changing parameters of brake current and frequency of the hoist motor at the start doesn’t have any effect when using MO=42 crane function?

Is it possible from the MS300 PLC to read the frequency of the pulse train connected on MI7?

Why does my license only work once and then becomes invalid for firmware update tool?

What are the additions to v2.x of ME300? Can I update my ME300 VFD v1.x to v2.x ?

Calculations with decimal (ie 0.1) values – MS300 internal PLC

Copying parameters from old firmware to new firmware VFD

What is the difference between external and internal airflow and power dissipation as mentioned in user manual?

cF1.1 or cF2.1 errors

Motion

How can I set Modbus communication time-out value for the RS-485 port of the ASDA-B2 Servo Drive? Even if I set it in P3-04, I see the time-out alarm (AL020).

Is it possible to configure the deceleration time for motor shutdown in the B3 series in the event of an emergency stop, positive limit, negative limit, or any other alarm?

How do I establish a compare function in servo drives using the main encoder as the axis source?

What is the significance of AL219, and what steps can be taken to avoid it?

How to switch to another operation mode under EtherCAT communication in DIADesigner-AX?

How can I reset EtherCAT communication in DIADesigner-AX when the cable falls accidentally and triggers alarms on the servos?

How can I retrieve the OD (Object Dictionary) value of a servo drive in DIADesigner-AX?

Control

Why is there no alarm displayed on the panel of ASD-A2 when the CANOpen cable gets disconnected?

How can I retrieve the OD (Object Dictionary) value of a servo drive in DIADesigner-AX?

How does anti-sway work and what are the main differences between anti-sway types?