Search

Delta Industrial Automation

Tips & Tricks

Open Search
Month

March 2013

Succsessful Application: Galvanizing production line on metal industry

Another Delta successful application!

Picture2

This time, the problem comes because of the big number of drives needed for the application.
Up to 68 Slaves to be controlled by a PLC, and even in Modus the theoretic limit is 128 nodes, the ones who are really in the field should know than more than 32 nodes means big troubles.

According to this, we recommend to our customer to use CANOpen in two different CANOpen Networks of 34 slaves each.
See the below picture with the network configuration

Picture3

Just let you know that it wasn’t easy, but is working, thanks for the great technicians of our Turkish distributor FastLTD.

Feel free to download the presentation with full explanation of the application.
CanOpen_ Galvanizing production line on metal industry

3

Succesful Application: Electric Concrete Truck

This is a new application for our Netherlands distributor Innomotion.
The idea is to make a concrete truck more economic and silent.

Normally the drum is turned with diesel power (hydraulics) from the truck.
Now the drum is loaded at the factory on electric power (cable) and on the road a small generator is supplying just enough power for slow turning and unloading of the truck.

It will save fuel but most of all were possible the truck can unload on the cable so in the innercities there is less pollution on the building site and less noise.

Inside the big cabinet there is a C2000 45KW delta PLC and HMI.
Nice eco-project Innomotion!
Dank u wel

6

Blog at WordPress.com.

Up ↑